Neware Lab 10V 6A 8 Channel Battery Testing Equipment Cell Charge And Discharge Tester 

INTRODUCTION:

Battery tester is mainly used to detect current, voltage, capacity, internal resistance, temperature, battery cycle life, and gives the graph. Battery tester has many channels to choose from. It can start at a single point, control at a single point, and measure different types of batteries (nickel-hydrogen, nickel-cadmium, lithium-ion, etc.).

 

Specific test functions include: battery voltage, load voltage (voltage difference), internal resistance, short-circuit protection time, short-circuit protection recovery function, over-discharge current, charging function, identification resistance (R1, R2), code reading, capacity test (including charge and discharge test).

SPECIFICATION:

Project index		Parameter index
Input Power		AC 220V ±10% / 50Hz
resolution		AD：16bit；DA：16bit
Input Resistance		≥1MΩ
Input Power		729W
Channel Features		Constant Current Source and Constant Voltage Source with Independent pairs of Closed-loop Structure
Channel Control Mode		Independent Control
Voltage	Constant voltage range control	0.05V~10V
	Minimum discharge voltage	2.0V
	Accuracy	± 0.1% of FS
	Stability	± 0.1% of FS
Current	Per Channel Current Range	0.03A~6A
	Accuracy	± 0.1% of FS
	CV cut-off current	0.012A
	Stability	± 0.1% of FS
Power	Per Channel Output Power	60W
	Stability	± 0.2%  of  FS
Time	Current Response Time	Maximum current rise time 20ms
	Step Time Range	0.1s≤Single Step Time Range≤365*24 h， Time Form Support 00：00：00(h、min、s)
Data Recording	Record Condition	Minimum time interval: 100ms
		Minimum voltage interval: 20mV
		Minimum current interval: 12mA
	Record Frequency	10Hz
Charge	Charge Mode	Constant Current Charge、Constant Voltage Charge、 CC-CV Charge 、CP-Charge
	End Condition	Voltage、Current、Relative Time、Capacity、-△V
Discharge	Discharge Mode	Constant Current Discharge  CP-D CR-D
	End Condition	Current、Current、Relative Time、Capacity、-△V
Pulse Model	Charge	Constant Current、Constant Power
	Discharge	Constant Current、Constant Power
	Min Pulse Width	500ms
	Pulse Number	Single Pulse Step Support 32 different Pulse
	Charge r To Discharge	One Pulse Step Can Support Continuous Charge And Discharge Change
	Stop Condition	Voltage、 Relative Time
DCIR Testing	Support Custom Access Point And Count The DCR
Cycle	Loop Measure Range	1~65535 times
	Max Steps Per Loop	254
	Nested Loop	Nested loop Function，Max Support 3 Layers
Protection	Software Protection	l Power-down Data Protection
		l Setting Protection Condition，Setting Parameter：Low Voltage limit、Upper Voltage limit、Low Current limit、Upper Current limit、Delay Time
		l It has anti reverse connection function
Voltage and Current Testing Sample		4-wire connecting
Noise		<85dB
Data Management		MySQL Database
Communication Means		TCP/IP Protocol
Data Output		EXCEL、TXT
Communication Interface		Ethernet Port
Main Channels		8
Leakage current		0.005mA

Equipment Working Environment

Project index	Parameter index
Working Temperature Range	0℃~40℃
Storage Temperature Range	-10℃~50℃
Working Environment Relative Humidity Range	≤70% RH
Storage Environment Relative Humidity Range	≤80% RH
Clamp Picture	Upper and lower clamps
Chassis size of each unit (W * D * H)	3U3F，480*730*130(mm)
Equipment Picture
	Picture for Reference Only, take the material object as the standard.

You may be interested in cell assembly machines: