-
Semi-automatic Winding Machine
Dec 19 , 2020
Product model:TMAX-DSP-LBPBM05B A. Functional Description： This machine is mainly used for precise winding of cylindrical lithium-ion battery batteries. The working process is as follows: the positive and negative plates are manually introduced into the winding part, separated from the diaphragm, winded according to the technological requirements, automatically pasted the termination tape, and the...
-
Graphene-enhanced electrodes for scalable supercapacitors
May 14 , 2021
School of Electrical and Electronic Engineering, The University of Manchester, M13 9PL, Manchester, England, UK School of Materials, The University of Manchester, M13 9PL, Manchester, England, UK School of Chemistry, The University of Manchester, M13 9PL, Manchester, England, UK Graphene was produced by anodic electrochemical exfoliation according to the previous report by Müllen et al. using 0.1...
-
A comparison among LiPF6, LiPF3(CF2CF3)3 (LiFAP), and LiN(SO2CF2CF3)2 (LiBETI) solutions: electrochemical and thermal studies
May 17 , 2021
J.S. Gnanaraja, E. Zinigrada, M.D. Levia, D. Aurbacha,*, M. Schmidtb a Department of Chemistry, Bar-Ilan University, Ramat-Gan 52900, Israel b Merck KGaA, D-64293 Darmstadt, Germany 2.Experimental The electrolyte solutions used were 1 M LiFAP, 1 MLiPF6, and 1 M LiN(SO2CF2CF3)2in a ternary solvent mixture EC+DEC+DMC (2:1:2) from Merck KGaA (highly pure solutions, Li battery grade, could be used as ...
-
The stability of organic solvents and carbon electrode in nonaqueous Li-O2 batteries
May 21 , 2021
2. Experimental 2.1. Preparation and cell testing Ethylene carbonate (EC), propylene carbonate (PC), DME,tri(ethylene glycol) dimethyl ether (i.e., Triglyme), di(ethyleneglycol) di-n-butyl ether (i.e. butyl diglyme, BDG), and lithiumbis(trifluoromethylsulfonyl)imide (LiTFSI) (all in batterygrade) were purchased from Novolyte Technologies. DMSO,triethyl phosphate (TEPa), 1-butyl-1-methylpyrrolidium...
-
The Influence of Polyvinylidene Fluoride (PVDF) Binder Properties on LiNi0.33Co0.33Mn0.33O2(NMC) Electrodes Made by a Dry-PowderCoating Process
Jun 21 , 2021
To cite this article: Ming Wang et al 2019 J. Electrochem. Soc. 166 A2151 Preparation of electrodes.—A manually operated powder coatingspray gun (Encore LT Manual Powder Coating System, Nordson) was used for the ESD process. One piece of 16μm thick aluminum foil was used as the electrode substrate, one piece of electrically grounded Cuplate (250μm thick) was used as the platform. The operation vol...
-
Effects of the Mixing of an Active Material and a Conductive Additive on the Electric Double Layer Capacitor Performance in Organic Electrolyte
Jun 25 , 2021
2. Experimental Procedure Activated carbon(MSP-20) for an active electrode material was provided from Kansai Coke & Chemicals Co.. Super-P(M.M.M. Carbon Co., Belgium) and polyvinylidene fluoride(Sigma-Aldrich) were employed as a conductive additive and a binder, respectively. The preparation procedure for a coin-type EDLC cell was briefly presented in Fig. 1. Active materia...
-
Monolithic Nanoporous Zn Anode for Rechargeable Alkaline Batteries
Jun 28 , 2021
Congcheng Wang,# Guoyin Zhu,# Pan Liu, and Qing Chen* METHODS Battery Assembly and Testing. Ni−Zn batteries were assembled into coin-type cells (CR2032) with a Zn anode, either the compressed nanoporous Zn (∼0.36 cm2 in size) or a pasted electrode comprising Zn powder (90 wt %, Aldrich), polyvinylidene fluoride (Arkema Kynar), and a NiOOH cathode (650 mAh, GP Batteries). Tin foil was used as the a...
-
Lithium Ion Conducting Polymerized Ionic Liquid Pentablock Terpolymers as Solid-State Electrolytes
Jul 12 , 2021
Abstract In this study, a lithium ion conducting polymerized ionic liquid pentablock terpolymer (PILPTP) was investigated as a battery electrolyte (Xiamen Tmaxcn Inc.) for lithium ion batteries. The ABCBA pentablock terpolymer, poly(tbS-b-EP-b-MS-b-EP-b-tbS) (tbS = tert-butyl-styrene; EP = ethylene-r-propylene; MS = 4-methylstyrene), was brominated and quaternized to covalently attach two dif...
-
Exploiting Anti-T-shaped Graphenes Architecture to Form Low Tortuosity, Sieve-like Interfaces for High-performance Anodes for Li-Based Cells
Jul 23 , 2021
Experimental Section Synthesis of multilayer-graphene nanowalls anchored on carbon paper：The carbon paper used was commercialized Toray carbon paper (CP). Every CP was tailored to be a wafer of 16mm in diameter. Subsequently, the mutilayer-graphene nanowalls would be grown on this CP substrate using RF-PECVD. The parameters were 200W (power), 890℃ (temperature), 30min (time) and 1000Pa (...
en
fr
de
ru
es
pt
ko
tr
pl
th
IPv6 network supported
